iTrip H-51 GPS tripmeter is a very compact device, ideal for offroad rallies.The H-51 tripmeter, also known as Halda, is used to measure distance, time, course indication and supply voltage. Halda H-51 is intended for baja, offroad and crossing rallies. The use of the tripmeter in such rallies and events is possible thanks to its welded, waterproof steel housing and hermetic connectors. Halda works correctly above and under water.
Table of contents – read briefly.
The GPS tripmeter meets all the expectations of a rally pilot: allows you to drive according to the road book issued by the organizer allows you to make corrections to the distance in case of discrepancies with the road book or if you get lost continuously tracks the distance traveled, vehicle speed, car supply voltage, current course (in the version with a GPS module) allows you to route a waypoint at any time based on the course to the destination and the distance to the destination and navigate to this waypoint (in the version with a GPS module)
How does halda H-51 help the crew?
iTrip does the hard and boring work for the pilot. Halda is always available and can display measured values or direct the crew to their destination at any time. He does it quickly and accurately. The crew provides intelligence and ideas for driving and the course of the competition. Then the crew, car and device become a team.
Road (distance) measurement
Distance is measured using one or two speed sensors. Halda with GPS can calculate the distance using the built-in GPS module (in the version with a GPS module). The distance measurement is carried out with excellent precision. With two speed sensors, the theoretical accuracy will be 0.025 m/1 km. Halda H-51 constantly monitors the operation of speed sensors. Information about the sensors’ operation is signaled to the pilot. The GPS signal quality is also displayed continuously.
The iTrip H-51 offroad tripmeter is an easy-to-use device
It has: 6 clearly marked and illuminated buttons 4 red LED displays are up to 20 mm high we include an instruction manual containing a description of each function and each button
Special version for Baja rallies
In baja and offroad rallies, there has been a specific entry in the road book for several years. It contains information about the driving direction expressed in the form of: course to the destination and distance to the destination. In a special version of the Halda GPS H-51, it can route waypoints (in the version with a GPS module), which are routed by the tripmeter based on previously set information from the road book. You can program up to 100 waypoints in the tripmeter that you will use during the rally. Thanks to the precision and speed of the tripmeter, you don’t even have to stop when you encounter such a description. You mark a waypoint and the tripmeter will take you to your destination.
Maximum precision of Halda H-51
Halda is made using the latest technology.
It has: super fast processor from a renowned manufacturer internal electronics are assembled by an automatic production line built-in GPS (uBlox) works 10 times per second time synchronization with GPS is performed every minute work with high resolution speed sensors, up to 40,000 pulses/1km
Who is Halda GPS for?
iTrip H-51 is a GPS halda for every crew and every rally pilot. Amateurs will benefit from the function thanks to its simple operation. Professionals will make the most of the tripmeter’s capabilities to gain seconds and fractions of seconds of advantage over other crews. GPS tripmeter features: distance measurement with a resolution of 1m, 10m or 100m maximum distance indication TRIP (PARTIAL) 99.99km ODO (TOTAL) 999.9km deleting TRIP/PARTIAL and ODO/TOTAL distances ODO/TOTAL distance correction – quick using the arrow buttons and full by entering the ODO/TOTAL distance memory of 10 calibrations with a maximum resolution of 0.025m / 1km the so-called azimuth routing, i.e. waypoint routing and navigation to it memory 100 points, azimuth + distance to the point azimuth routing without slowing down route visualization on the Garmin device (NMEA IN/OUT protocol in the Garmin device and a physical RS232 port required) Set contains: main unit harness for connecting power supply and sensors in the version with a GPS module – GPS antenna set of brackets Destiny
Tripmeter intended for:
baja rallies – measurement of the short distance between situations and the long distance from the start of a section or section. The choice remains in the pilot’s hands. In the version with azimuth routing, Halda GPS will turn the cumbersome navigation based on the distance to the target and course into the joy of winning :) crossing rallies – measuring the short distance between situations and the long distance from the start of a section or section. The choice remains in the pilot’s hands. additionally, always – voltage measurement in the vehicle’s electrical system, course and time from GPS (version with a GPS module)
GPS haldy structure
Characteristic features of halda: steel, welded housing red LED displays with a digit height of 20 mm hermetic connectors internal GPS module control of sensor operation GPS operation control azimuth routing function any type of one- or three-button resetters additional functional switches to speed up operation cooperation with the driver’s display during preparation Our rally equipment stands out above competitive solutions, e.g. terratrip or monit rally. Unlike Terratrip 101 or Terratrip 202 halds, Brantz are sensitive to the conditions in which they are used. Maybe Terratrip can be used in road conditions, but definitely not in dust and water.
Parameters displayed by the tripmeter:
total distance ODO (TOTAL) sectional distance TRIP (PARTIAL) direction of travel according to GPS TRACK (CAP) speed in km/h or miles/hour vehicle supply voltage time in hh:mm format GPS signal quality quality of speed sensors
