iTripcomputer Rally Computers
Every car or motorcycle rally requires navigation from the crew.
A reliable rally computer that precisely counts the distance traveled is essential to follow the designated route.
We have been producing precise rally computers for many years.
Our rally computers are the essence of reliability, precision, and well-chosen features.
The rally computers we produce are designed for proper operation. We cannot imagine a situation where a rally computer purchased from us does not function correctly, i.e., does not measure distance. If you need assistance – contact us.
Choosing a specific rally computer model requires your knowledge of the rallies you participate in. Only you know what you need to measure, what your preferences are, whether you prefer to follow the long route or use the short, stage route.
This is the one thing we cannot help with.
However, we can assist with installation, configuration, or the use of specific functions. Our YT channel and our wiki, which contains instructions, will help you with this.
iTripcomputer Rally Computers
The rally computers we produce are categorized by their intended use, which primarily stems from their design.
H Series Rally Computers
H series rally computers are designed for off-road and Baja rallies. Their design ensures resistance to water, dust, and mechanical damage. They operate without issues or failures even in open SSV vehicles. We produce 3 models that differ mainly in the displays used, their quantity, and to a small extent, their functions. The measurement capabilities are the same across all three models.
The smallest rally computer in this series, featuring the largest displays – up to 20 mm.
You can connect up to 2 sensors to it; it has a built-in uBlox GPS. It simultaneously displays 1 parameter, which you can select by operating the rally computer with a single button. If desired, it features a waypoint routing function.
For motorcycles, quads, and cars.
Rally computer with an LCD screen. Main parameters feature 14 mm digits. Auxiliary ones are smaller. You can connect up to 2 sensors to it; it has a built-in uBlox GPS. It simultaneously displays 5 parameters + synchronized GPS time. The screen facilitates easier configuration. If desired, it features a waypoint routing function.
For SSVs, cars, and trucks.
Rally computer with three sections of 14 mm high LED displays. You configure which parameters you want to see for each mode. You can connect up to 2 sensors to it; it has a built-in uBlox GPS. It simultaneously displays 3 parameters. It has the most measured parameters. If desired, it features a waypoint routing function.
For SSVs, cars, and trucks.
i Series Rally Computers
i series rally computers are designed for all types of rallies. Their design DOES NOT PROVIDE resistance to water and dust. The i-102, available in two functional versions, has a completely different user interface than the H series. The rally computer is highly flexible, allowing for deep personalization. The menu has been changed – it is now directly accessible from the mode and its structure resembles the bar menus used in old phones. There are additional menus for configuration and calibration.
All of this makes the rally computer easier to configure, but you need to understand its functions to utilize its full potential.
This is not a rally computer that will start measuring right out of the box!!
i-102 in the basic version. Fully configurable screens, a multitude of functions, and the ability to enable/disable them. You can configure it to your own expectations and needs. It simultaneously displays two parameters with names and GPS synchronized time. You can connect up to 2 sensors to it; it has a built-in uBlox GPS.
For cars and trucks.
i-102 in the version for regularity rallies (TSD). It also has all the functions of the basic version. On the REG screen, it displays 3 parameters with names and auxiliary information. It has advanced functions for regularity, the ability to upload files with fixed points, analyze calibration, etc.
For SSVs, cars, and trucks.
L Series Rally Computers
L series rally computers are designed for all types of rallies. Their design DOES NOT PROVIDE resistance to water and dust. Originally, we offered L-51 and L-100, which were equivalents of H-51 and H-100. Currently, only the L-104 is available, in two versions.
L-104 in the basic version. Rally computer with an LCD screen. Main parameters feature 14 mm digits. Auxiliary ones are smaller. You can connect up to 2 sensors to it; it has a built-in uBlox GPS. It simultaneously displays 5 parameters + synchronized GPS time. The screen facilitates easier configuration. If desired, it features a waypoint routing function.
For cars and trucks.
The L-104 ODOMETER version allows for creating measurement reports, containing measurement data and coordinates from each reset point. These reports, once copied to a USB drive and transferred to a PC, open in a web browser. No additional software is required.
For cars, trucks, and road measurements.
Classic Series Rally Computers
Classic series rally computers are designed for all types of rallies. Their main features are ease of use and simple configuration. Despite these advantages, they have not lost their precision. Calibration in these rally computers is adapted for measurements in classic cars, where calibration often takes very small values.
Rally computer with two sections of red LED displays. Simple operation results from buttons performing single functions and toggle switches for correcting the long ODO (TOTAL) distance and for changing the counting direction. You can connect up to 2 sensors to it; it has a built-in uBlox GPS.
For cars, trucks, and road measurements.
The Classic H rally computer has the same measurement functions as the basic version. What distinguishes it is: a housing protected against moisture and dust, and the inability to connect sensors. It has a built-in uBlox GPS.
This is a rally computer for quick measurements – you connect the power, and it works.
For cars, trucks, and road measurements.
